Removable vinyl
Comes off cleanly
- Sizes
- Up to 1600 mm wide, any length
- Best for
- Short-term promotions
Removable or permanent
Printed self-adhesive vinyl for walls, doors, boards, site sheds and equipment, removable or permanent.
Printed in-house on our HP Latex R2000 up to 1600 mm wide and as long as you need, then cut square or to shape.
Our customers mostly use it for walls and doors; signboards; and equipment and machinery. There are 4 ways to order: removable vinyl (comes off cleanly); long-life vinyl (permanent and durable); high-tack vinyl (sticks to rough surfaces); and clear with white ink (bold on glass). Each one is listed below with its sizes and details, and you can add more than one to the same quote. Turnaround: usually ready in 24 hrs, and we will tell you straight away if your date is tight.
Large format work is printed to your exact size, so measurements matter. Send the width and height, where it will be displayed and for how long, and we will quote the right material and finishing. A proof is sent for approval before we print.

We print self-adhesive vinyl signage in-house in Adelaide on an HP Latex R2000, a large-format printer for rigid boards and roll media that uses water-based inks instead of UV or solvent.
Printed on our HP Latex R2000 with water-based HP Latex inks. No UV-cured or solvent inks.
The inks are certified to UL 2801, which covers a range of human health and environmental criteria.
The inks are certified to UL 2818 for low chemical emissions, so prints suit indoor spaces as well as outdoors.
Prints come off the printer dry and odourless, and the inks contain no hazardous air pollutants.
The certifications are held by the HP Latex inks, as published by HP for the HP Latex R2000. They describe the inks, not Kooka Printing Hub or each finished sign. Some board and vinyl materials have an odour of their own. HAPs: per EPA Method 311.
Every sticker and decal is cut in-house on our digital flatbed cutter.
Our digital flatbed cutter follows the outline of your artwork, so every sticker or decal is cut exactly around the print.
We can cut through the vinyl only and leave it on its backing sheet, or cut right through so each piece comes off separately.
Machine cut edges are consistent from the first piece to the last, with no hand trimming.
Printing and cutting both happen in-house in Adelaide, so your job goes straight from our printer to our cutter. Nothing is sent away.
Pick a size and quantity, add as many as you like, then send one quote request. Not sure? Tell us how you’ll use it and we’ll recommend the best fit.
Comes off cleanly
Permanent and durable
Sticks to rough surfaces
Bold on glass
Most orders are ready in 24 hours after you approve the proof. We’ll confirm the date when we quote.
Yes. Our in-house designers can create your artwork from scratch or fix a file you already have. You’ll see a proof before anything prints.
A print-ready PDF at final size with 3 mm bleed is best. High-resolution JPG or PNG also works. Not sure? Send what you have and we’ll check it.
Yes. Collect from 736 North East Road, Holden Hill SA 5088, or ask us about delivery.
Bright posters from A3 up to large format, on paper or tougher synthetic stock for outdoors.
Portable banners that roll up into a carry case and stand in seconds. A favourite for expos and receptions.
Lightweight, budget-friendly banners on a simple X stand. Quick to set up for markets and events.
Printed mesh banners for temporary site fences. The wind blows through, your name stays up.
Send your artwork through and we’ll take a look. Most jobs are ready within 24 hours.