Made to order

Real Estate A-Frames

600 × 450 panel · Folds flat

  • A different design each side
  • 600 × 450 mm panels
  • Made for outdoors
  • Water-based latex inks

Compact A-frames made for open homes, auctions and inspections. They fold flat, carry in one hand, fit in the boot and set up in seconds on the footpath or the corner of the street.

Choose a moulded plastic frame with your graphics applied to both faces, or a steel frame with slide-in inserts you can change. Each side can carry a different design, so one sign can point both ways.

Our customers mostly use them for open homes and inspections; auctions and directional arrows; and display homes and land sales. There are 4 ways to order: moulded plastic frame (one piece, folds into its own carry shape); moulded plastic frame with large handle (easier to carry several at once); steel frame with slide-in inserts (change the message any time); and replacement graphics (refresh a frame you already own). Each one is listed below with its sizes and details, and you can add more than one to the same quote. Each job is made to order, so tell us your date and we will let you know straight away if it works.

Sizes, board and fittings depend on where the sign will stand and how long it needs to last. Send a few details with your quote request and we will recommend the best fit, set up or check your artwork, and send a proof before printing.

Real Estate A-Frames by Kooka Printing Hub
How we print it

Water-based latex printing

We print the graphics and inserts for these A-frames in-house in Adelaide on an HP Latex R2000, a large-format printer for rigid boards and roll media that uses water-based inks instead of UV or solvent.

  • Water-based inks

    Printed on our HP Latex R2000 with water-based HP Latex inks. No UV-cured or solvent inks.

  • UL ECOLOGO® certified inks

    The inks are certified to UL 2801, which covers a range of human health and environmental criteria.

  • UL GREENGUARD Gold certified inks

    The inks are certified to UL 2818 for low chemical emissions, so prints suit indoor spaces as well as outdoors.

  • Odourless prints, no HAPs

    Prints come off the printer dry and odourless, and the inks contain no hazardous air pollutants.

The certifications are held by the HP Latex inks, as published by HP for the HP Latex R2000. They describe the inks, not Kooka Printing Hub or each finished sign. Some board and vinyl materials have an odour of their own. HAPs: per EPA Method 311.

How we cut it

Cut in-house, cut to shape

Every board is cut in-house on our digital flatbed cutter: knife cut to shape or to clean rectangles, router cut for solid boards, and laser cut for acrylic.

  • Cut to any shape

    Our digital flatbed cutter follows the outline of your artwork, so circles, arrows, logos and custom shapes come out exactly where the print is.

  • Clean, square edges

    Rectangles are machine cut straight and square, with no hand trimming and no rough edges.

  • Router cut solid boards

    Solid materials such as ACM, foamed PVC and acrylic are routed for smooth, clean edges, holes and cut-outs.

  • Laser cut acrylic

    Acrylic is laser cut, which leaves a smooth, polished edge straight off the machine, even on fine detail.

  • Faster turnaround

    Printing and cutting both happen in-house in Adelaide, so your job goes straight from our printer to our cutter. Nothing is sent away.

Options & sizes

Pick a size and quantity, add as many as you like, then send one quote request. Not sure? Tell us how you’ll use it and we’ll recommend the best fit.

Moulded plastic frame

One piece, folds into its own carry shape

Panel sizes (W × H)
600 × 450 mm or 585 × 435 mm
Frame
Heavy-duty plastic in white or black
Graphics
Printed and laminated, applied to both sides
Choose size & quantity

How many do you need?

Moulded plastic frame with large handle

Easier to carry several at once

Panel sizes (W × H)
600 × 450 mm or 585 × 435 mm
Frame
High-impact plastic with a strong hinge and a larger handle
Graphics
Printed and laminated, applied to both sides
Choose size & quantity

How many do you need?

Steel frame with slide-in inserts

Change the message any time

Insert size (W × H)
600 × 450 mm
Frame
Powder-coated steel in black, white or red
Inserts
5 mm corflute; slide out the top to swap
Choose size & quantity

How many do you need?

Replacement graphics

Refresh a frame you already own

For plastic frames
Printed, laminated bubble-free vinyl, one per side. You apply them yourself
For steel frames
New 5 mm corflute inserts
Choose size & quantity

How many do you need?

Questions about Real Estate A-Frames

How long do real estate a-frames take?

It’s made to order, so the time depends on the job. We’ll tell you straight when it will be ready when we quote.

Can you design the artwork for me?

Yes. Our in-house designers can create your artwork from scratch or fix a file you already have. You’ll see a proof before anything prints.

What file should I send?

A print-ready PDF at final size with 3 mm bleed is best. High-resolution JPG or PNG also works. Not sure? Send what you have and we’ll check it.

Can I pick up my order?

Yes. Collect from 736 North East Road, Holden Hill SA 5088, or ask us about delivery.

Popular uses

Great for

  • Open homes and inspections
  • Auctions and directional arrows
  • Display homes and land sales
Good to know

Before you order

  • Turn the insert around. On a steel frame, flipping the insert to face inwards protects the print in the car.
  • Sizes are the printed panel. The frame stands taller than the panel because of its legs.
  • Artwork ready? PDF at final size with 3 mm bleed is ideal. No artwork? Our designers can create it.
Rigid Signs

You might also like

See all
Usually ready in 24 hrs

Election Signs

Weatherproof corrugated plastic (often called corflute) signs with stakes or ties. Printed fast when deadlines are tight.

Make your mark.

Send your artwork through and we’ll take a look. Most jobs are ready within 24 hours.